Commercial Gas Engineer Telford — Plant Rooms & Industrial Heating
CombiCert is a commercially qualified Gas Safe firm in Telford working on plant rooms, industrial boilers, warm-air heating, tightness testing and larger heating systems. We cover Telford, Shropshire, the West Midlands and further afield when the job justifies it.
Plant room or commercial heating work?
Commercially qualified gas engineers for plant rooms and industrial heating across Telford and Shropshire.
This page is for factories, warehouses, stadiums, leisure sites and multi-boiler plant — not a shop or office cupboard boiler. For smaller business premises see our light commercial gas services.
Call 07393 220 694 with the site address, make/model and what the plant is doing.
Commercial gas systems require engineers who are appropriately qualified for the
equipment and installation being worked on.
CombiCert carries out commercial gas work across a range of premises and heating
systems. Depending on the site and equipment, our work can include:
Commercial boiler servicing
Commercial boiler repairs and fault diagnosis
Commercial boiler replacement
Plant-room work
Commercial gas pipework
Gas tightness testing
Commercial gas safety inspections
Warm-air heating systems
Heating controls and associated system faults
Investigation of wider commercial heating-system problems
Commercial Boiler Servicing & Repairs
A commercial boiler fault can affect far more than the appliance itself. Problems
may originate from pumps, controls, sensors, valves, hydraulic arrangements,
gas supply, flues or the wider heating system.
We diagnose the system rather than simply replacing components until the fault
disappears.
Our commercial fault-finding work can include investigation of:
Boilers failing to fire or repeatedly locking out
Ignition and combustion faults
Poor or unstable system pressure
Temperature-control problems
Pumps and circulation faults
Valve and actuator problems
Heating zones not operating correctly
Flue and combustion-related issues
Plant-room control problems
Intermittent faults that are difficult to reproduce
Where practical, we aim to identify the actual cause of the problem before
recommending major component replacement.
Commercial Boiler Replacement & Installation
When an existing commercial boiler has reached the end of its useful life or is no
longer economical to repair, we can assess the existing system and advise on suitable
replacement options.
Commercial boiler replacement is rarely just a question of matching the old boiler’s
output. We consider the actual heat demand, existing hydraulic arrangement, controls,
flue system, gas supply, plant-room layout and how the building is being used.
Where appropriate, we can work with single boilers or multiple-boiler cascade
arrangements and advise on practical improvements to the existing installation.
Commercial Plant Rooms
Plant-room faults often involve several systems working together rather than one
isolated appliance.
Our commercial experience includes work involving boilers, pumps, expansion
arrangements, controls, valves, distribution pipework, flues and associated heating
equipment within commercial plant rooms.
We can investigate existing installations, diagnose faults and carry out agreed
repair, servicing or replacement work where the equipment falls within our
qualifications and scope.
Commercial Gas Tightness Testing
Commercial gas installations may require tightness testing following alterations,
suspected leakage, commissioning work or as part of wider safety investigations.
CombiCert carries out commercial gas tightness testing where appropriate to the
installation and can investigate issues identified during testing.
If a leak or pressure-loss issue is found, we will explain the findings and the next
steps required before further work is undertaken.
Warm-Air Heating
Warm-air heaters are widely used in workshops, industrial units, warehouses and
larger commercial spaces.
We work on commercial warm-air heating equipment and can assist with servicing,
fault diagnosis and repairs where the appliance and installation fall within our
scope.
Problems may involve the burner, ignition system, controls, airflow, gas supply,
safety devices or the wider installation rather than one obvious failed component.
Commercial Gas Safety
Commercial premises require gas appliances and installations to be maintained and
operated safely.
We can carry out commercial gas safety inspections and associated checks appropriate
to the equipment and installation being assessed.
Where faults or unsafe conditions are identified, we explain the issue clearly and
advise on the work required to return the installation to a safe condition.
Experience With Larger Commercial Heating Systems
CombiCert’s commercial experience includes work on larger heating systems serving
commercial, industrial and specialist premises.
Our work has included commercial boiler plant, cascade systems, larger flue
arrangements, expansion systems, heating controls and associated plant-room
equipment.
This experience is particularly valuable when diagnosing faults that do not sit
neatly within one appliance and require an understanding of how the wider system
behaves.
Commercial Clients & Sites We Have Worked With
Our commercial gas and heating experience includes work at sites operated by
nationally recognised organisations as well as independent businesses and commercial
property operators.
Sites and organisations we have carried out commercial gas or heating work for
include:
Aston Villa Football Club – commercial heating work at the
training ground and stadium
Müller
Heinz
KFC
The work varies considerably from site to site and can include commercial boiler
servicing and repairs, fault diagnosis, plant-room equipment, gas safety work and
investigation of larger heating systems.
We also work with factories, industrial units, workshops, offices, hospitality
businesses and other commercial premises where reliable heating and safe gas
installations are essential to day-to-day operation.
Commercial Heating for Stadiums, Factories & Larger Sites
Commercial heating requirements vary enormously between sites.
A factory, football facility, industrial unit or large commercial building may have
very different operating patterns, heat loads, controls and reliability requirements.
Our experience includes commercial heating work at football facilities, manufacturing
sites and other larger premises where heating reliability, plant access and operational
disruption all need to be considered when planning work.
Why Choose CombiCert for Commercial Gas & Heating Work?
Commercial gas qualifications
Experience with larger boiler and heating systems
Domestic and commercial engineering background
Commercial fault diagnosis and system investigation
Commercial boiler servicing, repairs and replacement
Plant-room experience
Gas tightness testing
Warm-air heating experience
Clear communication with site contacts and facilities teams
Based in Telford with wider commercial coverage available
Commercial Sites We Work With
Our commercial work can include:
Factories and industrial premises
Warehouses and workshops
Offices and commercial buildings
Sports and leisure facilities
Hospitality premises
Retail and mixed-use commercial sites
Property portfolios and managed commercial premises
CombiCert is based in Telford and carries out commercial gas and heating work across
Shropshire, the West Midlands and further afield where the scale and nature of the
project makes wider travel practical.
For larger commercial projects, contact us with the site location, equipment details
and a brief description of the issue or work required.
Commercial Gas & Heating FAQs
Do you repair commercial boilers?
Yes. We carry out commercial boiler fault diagnosis and repairs where the appliance
and installation fall within our qualifications and scope.
Do you service commercial boilers?
Yes. We service commercial boilers and associated equipment appropriate to the
installation.
Can you replace a commercial boiler?
Yes. We can assess existing systems and advise on replacement options where
appropriate, including larger commercial boiler installations.
Do you work on commercial plant rooms?
Yes. Our commercial experience includes plant-room boilers, pumps, controls,
valves, expansion arrangements, flues and associated heating equipment.
Do you carry out commercial gas tightness testing?
Yes, where appropriate to the installation and within our scope of work.
Do you work on warm-air heaters?
Yes. We work on commercial warm-air heating systems where the appliance and
installation fall within our qualifications.
Do you cover commercial sites outside Telford?
Yes. For larger commercial work we cover Shropshire, the West Midlands and can
travel further where the project justifies it.
Can you work on large commercial heating systems?
Yes. Our experience includes larger commercial boiler and heating systems, including
multi-boiler installations and commercial plant-room equipment.
Need a Commercial Gas or Heating Engineer?
Contact CombiCert with the site location, equipment details and a brief description
of the work required.
For breakdowns, servicing, commercial boiler replacement, plant-room work or wider
gas and heating requirements, we can discuss the site and advise on the next step.
Recent plant-room work in Telford includes twin Remeha Gas 220 Ace commercial boilers and Baxi commercial plant-room installs — pipework, controls and commissioning handled by commercially qualified Gas Safe engineers. Send photos of the plant room and we will tell you straight whether it is a repair, service or replacement job.
Google reviews
★★★★★
“Boiler went down early morning at our Telford rental and they were over and sorted it by lunch. Highly recommend.”
Morgan B. · Google review
★★★★★
“After the boiler suddenly having no power running to it, within 2 hours of calling Pete, he had attended, identified the fault and got us back up and running. Very professional and efficient service.”
Ed H. · Google review
★★★★★
“Pete has always done my services on my boiler for the last 12 years… He is always competitively priced and honest about anything that might need doing.”
